1-800-542-4518 mail@pro-steel.com

Specifications

View specifications on the tabs below or click these buttons to download them.

Weight Table
Recycled Content
References
Specifications

Edging

Item Qty PCS
PLTS		 PCS
BNDL		 Unit
Weight		 Edging
Weight		 Stks
Ea		 Stks
PLTS		 Total
Wgt		 TTL
WGT		 TRUCK
QTY-PCS		 TRUCK
QTY-PLTS
   FEET EA EA  PER FT  LBS  EA  EA  LBS LBS    
 PS14-10′ 3000″ 300 10 0.99# 2944# 4 1200 500# 3444# 3900 13
 PS14-10’x6″ 2000′ 200 10 1.53# 3055# 4 1200 500# 3555# 2600 13
 PS10-10′ 2100′ 210 5 1.43# 2988# 4 840 365# 3353# 2100 14
 PS10-16′ 1600′ 100 5 1.49# 2376# 6 600 225# 2601# 1400 18
 PS10-10’x6″ 2000′ 200 5 1.66# 3311# 4 800 350# 3661# 1470 12
 PS3/16-16′ 800′ 50 5 2.16# 1726# 6 300 208# 1934# 950 24
PS3/16-16’x6″ 800′ 50 5 3.54# 2828# 6 300 208# 3036# 800 15
 PS1/4-10’x4″ w/J-Stakes 300′ 60 3 3.4# 2040# 3 180 158# 2176#    
PS1/4-10’x5″ w/J-Stakes 300′ 60 3 4.2# 2520# 3 180 158# 2656#    
PS1/4-10’x6″ w/J-Stakes 300′ 60 3 5.0# 3000# 3 180 158# 3136#    
PS1/4-16’x4″ w/J-Stakes 480′ 30 3 5.1# 2448# 4 120 122# 2539#    
PS1/4-16’x5″ w/J-Stakes 480′ 30 3 6.3# 3024# 4 120 122# 3115#    
PS1/4-16’x6″ w/J-Stakes 480′ 30 3 7.5# 3600# 4 120 122# 3691#    

Circle Sections

Item Qty Unit Weight Stks Ea Stks PLTS Total Wgt
  FEET PER FT EA EA LBS
CS14-Circle Sections EACH 2.45# 2 .8# 3.25#
CS14-Circle Sections 20/Box 49# 40 16# 65#

Tree Rings

Item Qty Unit Weight Stks Ea Total Wgt TTL WGT
    PER FT EA LBS LBS
C14-20″ EACH 5.7# 2 .8# 6.5#
C14-28″ EACH 7.8# 3 1.2# 9#
C14-36″ EACH 9.9# 4 1.6# 11.5#
C10-36″ EACH 15.9# 4 1.6# 17.5#
C10-60″ EACH 26.1# 6 2.4# 28.5#
C10-72″ (2PCS) EACH 40# 8 3.5# 43.5#

Stakes

Item Qty Unit Weight
     PER FT
PS Stakes 40/Box 15#
PS Stakes EACH .375#
PS J-Stakes 20/Box 12#
PS J-Stakes EACH .60#
 PS Stakes 16″ 40/Box 21#
 PS Stakes 16″ EACH .53#
 PS U-Stake 100/Box 41#
 PS U-Stake EACH .4#

Wood (Not Sold Individually)

Item Qty Unit Weight Edging Weight
    PER FT LBS
Lodge Pole 2″ x 8′ 390/PALLET    2001#/Pallet
Lodge Pole 2″ x 8′ EACH 6.67# 6.67

T-Post (Not Sold Individually)

Item Qty Unit Weight Edging Weight
    PER FT LBS
T-Post 5′ 6″ 200/PALLET   1394#/Pallet
T-Post 5′ 6″ EACH 6.88#  

Accessories

Item Qty Unit Weight Stks Ea Total Stks Wgt  
    PER FT EA LBS  
Corners Inside Pockets 14GA 20/Box 38# 40 16#  
Corners Inside Pockets 14GA EACH 1.9# 2 .8#  
Corners Outside Pockets 14GA 20/Box 38# 40 16#  
Corners Outside Pockets 14GA EACH 1.9# 2 .8#  
Corners Inside Pockets 10GA 10/Box 32# 20 8#  
Corners Inside Pockets 10GA EACH 3.5# 2 1#  
Corners Outside Pockets 10GA 10/Box 32# 20 8#  
Corners Outside Pockets 10GA EACH 3.5# 2 1#  
Corners Without Pockets 14GA 20/Box 60# J-Stakes ordered separately @ 2 J-Stakes per corner
Corners Without Pockets 14GA EACH 3# J-Stakes ordered separately @ 2 J-Stakes per corner
Corners Without Pockets 10GA 10/Box 32# J-Stakes ordered separately @ 2 J-Stakes per corner
Corners Without Pockets 10GA EACH 3.5# J-Stakes ordered separately @ 2 J-Stakes per corner

End Pieces

Item Qty Unit Weight
    PER FT
End Piece 14GA 10/Box 5#
End Piece 14GA EACH .5#
End Piece 10GA 10/Box 7#
End Piece 10GA EACH .7#
Edge Former EACH 15#

 

pro-steel-landscape-edging-3LEED NEW PRODUCT CONTENT FORM

 

A. IDENTIFICATION

  1.  Product Name: Pro-Steel Landscape Edging
  2.  Manufacturer: PRO-STEEL, INC. www.pro-steel.com

    a. Contact: Ph: 817-572-4959

  3.  Applicable Specification Section #- ISO 14021:1999

B. PRODUCT CERTIFICATION:

  1. Steel Content: 72.9 percent by weight
  2. Steel Mill Source : Nucor-Hickman, AR
  3. Pre-Consumer Recycled Content: 9% percent by weight
  4. Post-Consumer Recycled Content: 60.1% percent by weight
  5. Description of Recycled Content: 69.1 Scrap Steel/30.9 Alloys and other Iron units.
pro-steel-landscape-edging-3References:
American Society for Testing and Materials:

  1. ASTM A 621- Specification for Sheet and Strip, Carbon, Hot-Rolled, Drawing Quality.

The Association for Finishing Process of the Society of Manufacturing Engineers.

Material:

Steel Manufactured in compliance with: ASTM A 366, ASTM A 620, or ASTM A 621.

Fabricated Components:

Edge Strips:

  1. Thickness available:

    14 GA 1/16”, 10 GA 1/8”, 7 GA 3/16”

  2. Strip lengths:

    8’, 10’ and 16’ typically, custom lengths available

  3. Stake loops: Punch formed into edge strip.
  4. Stake loop spacing:

    Generally 30” O.C.

    Variances due to strip length.

Stakes:

  1. Dimensions:

    PS10 x 12” tapered

    PS10 x 16” tapered

SPECIAL ORDER ONLY
¼” thickness (No Pre-Punched Pockets – Use J-Stakes)

Available in 4” and 5” widths, 10’ lengths

Surface Preparation
All fabrication steel shall be cleaned and prepared for finishing in a five stage wash process incorporating an alkaline treatment that chemically alters the steel finish that creates a surface etch for improved bonding.

Coating:

  1. Application: Electrostatic spray system.
  2. Coating Thickness: 1.5 mil to 2 mil
  3. Pencil Hardness: H-2H
  4. Impact Resistance: 160 in/lb (test max.)

Coating Material:
Powder Coating is a proprietary formulation of powder coating exclusive to Pro-Steel Inc. of Fort Worth, Texas. The system is an electrostatic application of a custom composition of acid terminated, high molecular weight, corrosion inhibiting polyester powder coating resin cross linked with an exterior durable epoxy.

Steel Landscape Edging
1. Steel Landscape Edging Size: Comply with ASTM A 621, hot rolled, standard flexible carbon steel landscape edging, fabricated in sections with stake pockets stamped and punched along sections approximately thirty-six inches (36”) apart to received stakes. Steel landscape edging shall be double staked at overlap joints, and designed to receive tapered steel stakes.

  1. a. Insert one of the following landscape edging sizes:
    ¼” thick (3 gauge) 4”, 5”, or 6” wide, by 10’ length with 3 J-stakes (coverage 10’)
    ¼” thick (3 gauge) 4”, 5”, or 6” wide, by 16’ length with 4 J-stakes (coverage 16’)
    3/16” thick (7 gauge), 4”or 6” wide, by 16’ length, with 6 stakes (coverage 15’-4”)
    1/8” thick (10 gauge), 4” or 6” wide, by 16’ length with 6 stakes (coverage 15’-4”)
    1/8” thick (10 gauge), 4” or 6” wide, by 10’ length with 4 stakes (coverage 9’-4”)
    1/16” thick (14 gauge), 4”or 6” wide, by 10’ length with 4 stakes (coverage 9’-4”)

NOTES: 1) INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH MANUFACTURER’S SPECIFICATIONS. 2) THIS DRAWING NOT TO SCALE.

2. Steel Landscape Edging Finish:

  1. Powder coating is a proprietary formulation exclusive to Pro-Steel Inc. The system is an electrostatic application of custom composition of acid terminated, high molecular weight, corrosion inhibiting polyester powder coating resin cross linked with an exterior durable epoxy. Powder is applied minimum mil thickness of 1.5 up to 2 mil. thick to ensure a long lasting finish. In Green, Brown, Black & Unfinished.

3. Steel Landscape Edging Stakes:

  1. 1/8” standard pocket 10 gauge specify staking as follows:
    PS-Stakes:
    Steel, tapered, 12” length and finished to match specified steel landscape edging. Stakes designed specifically to anchor steel landscape edging in place, and made by the manufacturer of the steel landscape edging for which they will be used.
    J-Stakes:
    Steel, tapered, formed 12” length and finished to match specified steel landscape edging. Stakes designed specifically to anchor steel landscape edging in place, and made by the manufacturer of the steel landscape edging for which they will be used.

4. Accessories: Standard End Pieces, 90 degree pre-formed corners, Tree Rings and Tree Circle Sections.

INSTALLATION OF PRO-STEEL LANDSCAPE EDGING
A. Steel Landscape Edging: Install steel landscape edging as indicated on site drawings and according to manufacturer’s recommendations. Anchor with steel stakes spaced approximately 36 inches on-center, driven below top elevation of edging, or at every stake pocket location in landscape edging sections designed and manufactured to receive stakes. Stakes shall be located in solid undisturbed soil, or in proper soil compaction.

  1. Horizontal Alignment: Install straight and curved sections true to the alignments as indicated, free of waves or bends, using strings as guides. Follow the marked alignments as per site drawings. Allow the Landscape Architect to review the layout.
  2. Vertical Alignment: Install parallel with the finished grade.
  3. Damaged Edging: Replace steel edging sections damaged during construction operations.

ALL STEEL LANDSCAPE EDGING SHALL BE _________ THICK X _________” WIDE WITH _________ STAKES PER SECTION. PAINTED _________________________ AT THE FACTORY MANUFACTURED BY PRO-STEEL INC.

SELECT DESIRED FINISH

  • GREEN
  • BROWN
  • BLACK
  • UNPAINTED
Download Our Flyer